As we all know, the development and widespread use of uv printer, brings more convenience and colors to our daily life. However, every printing machine has its service life. So daily machine maintenance is very important and necessary.
The following is an introduction to the daily maintenance of the UV printer:
Maintenance before Starting Work
1. Check the nozzle. When the nozzle check isn’t good, it means needs to be clean. And then choose the normal cleaning on the software. Observe the surface of print heads during cleaning. (Notice: All color inks are drawn from nozzle, and the ink is drawn from the surface of the print head like water drop. No ink bubbles on the surface of the print head)The wiper cleans the surface of the print head. And the print head ejects ink mist.
2. When the nozzle check is good, you also need to check the print nozzle before powering off the machine every day.
Maintenance before Power off
1. Firstly, the printing machine raises the carriage to the highest. After raising to the highest, move the carriage to the middle of the flatbed.
2. Secondly, Find the cleaning liquid for the corresponding machine. Pour a little cleaning liquid into the cup.
3. Thirdly, put the sponge stick or paper tissue into the cleaning solution, and then clean the wiper and cap station.
If the printing machine isn’t used for a long time, it needs to add cleaning liquid with a syringe. The main purpose is to keep the nozzle wet and not clog.
After maintenance, let the carriage go back to the cap station. And perform normal cleaning on the software, check the print nozzle again. If the test strip is good, you can power offer the machine. If it’s not good, clean again normally on the software.
Post time: Apr-15-2022